View SY8890505_1320612.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Micrel, Inc.
LASER DIODE CONTROLLER WITH APC
SY88905
SY88905
FEATURES
s DC bias current adjustable to 25mA s Buffered Loss-of-Signal output when used with SY88903 s Monitor Diode power control circuit s Designed for use with SY88902 and SY88903 s Single power supply s Available in 10-pin (3mm) MSOP
DESCRIPTION
The SY88905 is an integrated Laser Diode controller for the SY88902 Laser Driver and SY88903 Laser Receiver that provides power control functions for a complete module solution. The SY88905 is designed to provide the laser diode with an independent DC threshold current (IBIAS) source to assure optimum laser diode performance. The SY88905 also provides buffered Loss-of-Signal (LOS) output in PECL level. The device is designed for fast and accurate calibration of the laser diode. Once the optimal operating point is determined and set for a specific laser diode, the threshold current (IBIAS) is designed to automatically compensate for laser diode aging and module temperature.
APPLICATIONS
s s s s s Controller for High Speed Optical Data Transmission 1.25Gbps Gigabit Ethernet 531 Mbps and 1062Mbps Fibre Channel 622Mbps SONET Gigabit Interface Converter
BLOCK DIAGRAM
LOSOUT VREF2
IBIAS
MD
LOSIN 40X VCC GND + VREF 2
VREF
IBIAS SET
IBIAS FB
IPIN
SET
M9999-081005 hbwhelp@micrel.com or (408) 955-1690
Rev.: C
Amendment: /0
1
Issue Date: August 2005
Micrel, Inc.
SY88905
PACKAGE/ORDERING INFORMATION
Ordering Information
LOSIN 1 LOSOUT 2 GND 3 IBIAS 4 VCC 5 MSOP K10-1 10 VREF 9 IBIAS SET 8 IBIAS FB 7 6 IPIN SET MD
Part Number SY88905KC SY88905KCTR(1) SY88905KH SY88905KHTR(1)
Note: 1. Tape and Reel.
Package Type K10-1 K10-1 K10-1 K10-1
Operating Range Commercial Commercial Commercial Commercial
Package Marking 905 905 905 with Pb-Free bar-line indicator 905 with Pb-Free bar-line indicator
Lead Finish Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu
10-Pin MSOP (K10-1)
PIN NAMES
Pin VCC GND LOSIN VREF IPIN SET LOSOUT IBIASFB IBIASSET MD IBIAS Type Power Power TTL Input Analog Output Analog Input PECL Output Analog Output Analog Input Analog Input Analog Input Positive Power supply Ground Loss-of-Signal Input from SY88903 Reference Voltage Adjustable, Resistor to VREF sets Monitor Diode Photo Current Reference Loss-of-Signal PECL output Monitor Diode Feedback Adjustable, Resistor to VREF sets the DC bias current for the Laser Diode Monitor Diode Connection DC bias current for the Laser Diode Description
M9999-081005 hbwhelp@micrel.com or (408) 955-1690
2
Micrel, Inc.
SY88905
ABSOLUTE MAXIMUM RATINGS(1) LOGIC DIAGRAM
Symbol VCC LOSIN LOSOUT, IPIN SET IBIASFB, IBIAS SET TA Tstore IPIN SET, IBIAS SET, IMD IBIASFB IBIAS IVREF Rating Power Supply Voltage Input Voltage Others; I/O Voltage Operating Temperature Range Storage Temperature Range Max. Sink Current Max. Source Current Max. Sink Current Max. Source Current Value 0 to +7.0 0 to VCC -0.3, VCC +0.3 0 to +85 -55 to +125 1 1 30 2 Unit V V V C C mA mA mA mA
Note: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability.
100H ECL DC ELECTRICAL(1)
VCC = +5V 10%
TA = 0C Symbol VOH VOL Parameter Output HIGH Voltage Output LOW Voltage Min. Max. TA = +25C Min. Max. TA = +85C Min. Max. Unit mV mV Condition 50 to VCC-2V 50 to VCC-2V
VCC - 1025 VCC - 880 VCC - 1025 VCC - 880 VCC - 1025 VCC - 880 VCC -1810 VCC -1620 VCC -1810 VCC -1620 VCC -1810 VCC-1620
Note: 1. 100H circuits are designed to meet the DC specifications shown in the table where transverse airflow greater than 500lfpm is maintained.
M9999-081005 hbwhelp@micrel.com or (408) 955-1690
3
Micrel, Inc.
SY88905
DC ELECTRICAL CHARACTERISTICS
VCC = +5V 10%
TA = 0C Symbol ICC IBIAS SET IBIAS ABIAS VREF VPIN SET VBIAS SET IBIAS FB ABIAS FB
Notes: 1. |IMD - IPIN SET| = 100A 2. |IBIAS FB| / |IMD - IPIN SET|
TA = +25C Min. -- -- 0.5 28 2.30 0.95 0.8 0.1 350 4 Typ. 28 -- -- 37 2.75 1.13 1.0 0.4 500 -- Max. 40 0.9 25 44 3.30 1.35 1.20 1.0 -- 14 40 0.9 25 44 3.30 1.35 1.20 1.0 -- 14
TA = +85C Min. Typ. Max. Unit -- -- 0.5 28 2.30 0.95 0.8 0.1 350 4 -- -- -- -- -- -- -- -- -- -- 40 0.9 25 44 3.30 1.35 1.20 1.0 -- 14 V V V V A mA mA mA =IBIAS / IBIAS SET IREF = -100A =VREF - VPIN SET =VREF - VBIAS SET IBIAS = 15mA Conditions No output load
Parameter Power Supply Current IBIAS SET Input Current IBIAS Output Current IBIAS Current Gain Reference Voltage VPIN SET Voltage Tracking VBIAS Voltage Tracking Current(1) Gain(2)
Min. -- -- 0.5 28 2.30 0.95 0.8 0.1 350 4
Typ. -- -- -- -- -- -- -- -- -- --
Max.
VCOMP BIAS Compliance Voltage Feedback Feedback
TTL DC ELECTRICAL CHARACTERISTICS
VCC = +5V 10%
TA = 0C Symbol VIH VIL IIH IIL VIK Parameter Input HIGH Voltage Input LOW Voltage Input HIGH Current Input LOW Current Input Clamp Voltage Min. 2.0 -- -- -- -- -- Max. -- 0.8 20 100 -0.3 -1.2 TA = +25C Min. 2.0 -- -- -- -- -- Max. -- 0.8 20 100 -0.3 -1.2 TA = +85C Min. 2.0 -- -- -- -- -- Max. -- 0.8 20 100 -0.3 -1.2 Unit V V A mA V Condition -- -- VIN = 2.7V VIN = VCC VIN = 0.5V IIN = -12mA
Note: 1. Individual product specifications over-ride general specifications.
DETAILED DESCRIPTION
The SY88905 is an integrated control circuit for laser diode modules intended for high-frequency fiber-optic applications. The device is designed to operate with the SY88902 laser diode driver providing Automatic Power Control (APC) which provides bias current control and monitor diode interface. The device also interfaces with the SY88903 high-speed limiting amplifier providing chatter-free Loss of Signal function. Laser Diode Supply Current The SY88905 provides the adjustable drive current for the laser diode, DC bias.
M9999-081005 hbwhelp@micrel.com or (408) 955-1690
Monitor Diode The MD pin on the SY88905 provides low frequency light intensity, laser power out feedback from the monitor diode in the laser diode package. This feedback is used to adjust the IBIAS level through the Automatic Power Control circuit to maintain a near constant power output from the laser diode.
4
Micrel, Inc.
SY88905
SIMULATION GRAPHS
IBIAS vs IBIAS SET
3.5E-02
3.0E-02
2.5E-02
2.0E-02
IBIAS (A)
1.5E-02
1.0E-02
5.0E-03
0.0E+00 0.E+00 1.E-04 2.E-04 3.E-04 4.E-04 5.E-04 6.E-04 7.E-04 8.E-04 IBIAS SET (A)
Figure 1. IBIAS v. IBIAS SET
IBIAS vs RBIAS SET
3.00E-02
2.50E-02
2.00E-02
IBIAS (A)
1.50E-02
1.00E-02
5.00E-03
0.00E+00 1.00E+03
1.00E+04 RBIAS SET (Ohm)
1.00E+05
Figure 2. IBIAS v. RBIAS SET M9999-081005 hbwhelp@micrel.com or (408) 955-1690
5
Micrel, Inc.
SY88905
SIMULATION GRAPHS
IPIN vs IPINSET
6.E-04
5.E-04
4.E-04
IPIN (A)
3.E-04
2.E-04
1.E-04
0.E+00 0.E+00
1.E-04
2.E-04
3.E-04 IPIN SET (A)
4.E-04
5.E-04
6.E-04
Figure 3. IPIN v. IPIN SET
IPIN SET vs RIPIN SET
7.00E-04
6.00E-04
5.00E-04
IPIN SET (A)
4.00E-04
3.00E-04
2.00E-04
1.00E-04
0.00E+00 1.00E+03
1.00E+04 RIPIN SET (A)
1.00E+05
Figure 4. IPIN SET v. RPIN SET
M9999-081005 hbwhelp@micrel.com or (408) 955-1690
6
Micrel, Inc.
SY88905
SIMULATION GRAPHS
V IPIN SET vs IPIN SET
2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0.00E+00
V IPIN SET (V)
1.00E-04
2.00E-04
3.00E-04 IPIN SET (A)
4.00E-04
5.00E-04
6.00E-04
Figure 5. V IPIN SET v. IPIN SET
Typical Vbiasset Voltage Tracking
1.1
Vref - Vbiasset (V)
1.05
1
0.95
0.9 0 40 Junction Temperature (deg C) 80 120
Figure 6. Typical VBIAS SET Voltage Tracking
M9999-081005 hbwhelp@micrel.com or (408) 955-1690
7
Micrel, Inc.
SY88905
SIMULATION GRAPHS
Typical VPIN SET Voltage Tracking
1.25
VREF - VBIAS SET (V)
1.20
1.15
1.10
1.05 0C
40C
80C
120C
Junction Temperature (deg C)
Figure 7. Typical VPIN SET Voltage Tracking
IBIAS FB vs IMD - IPIN SET (IPIN SET =100 uA)
0.0006
0.0004
0.0002
IBIAS FB (A)
0
-0.0002
-0.0004
-0.0006 -1.50E-04 -1.00E-04 -5.00E-05 0.00E+00 5.00E-05 1.00E-04 1.50E-04
IMD - IPIN SET (A)
Figure 8. IBIAS FB VS. IMD - IPIN SET
M9999-081005 hbwhelp@micrel.com or (408) 955-1690
8
SY88905
VCC VCC VCC OUT
+TX_DAT -TX_DATA
VEE
REXT
Laser Module
Gigabit EthernetTerminal
DIN DIN
SY88902
RSET VREF EN
OUT RSER
IBIAS SET
VREF VCC IBIAS MD
APPLICATION EXAMPLE FOR 3-CHIP SET SOLUTION
IBIAS SET VBIAS SET
IBIAS FB
SY88905
LOSOUT
PECL
LOSIN VREF EN LOS DOUT DIN VREF IPIN SET VPIN SET GND
RX_LOS
+RX_DAT -RX_DAT
DOUT
SY88903
DIN VBB VLVL VCC VEE VCC
M9999-081005 hbwhelp@micrel.com or (408) 955-1690
Micrel, Inc.
9
Micrel, Inc.
SY88905
10 LEAD MSOP (K10-1)
Rev. 00
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131
TEL
USA
+ 1 (408) 944-0800
FAX
+ 1 (408) 474-1000
WEB
http://www.micrel.com
The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2005 Micrel, Incorporated. M9999-081005 hbwhelp@micrel.com or (408) 955-1690
10

▲Up To Search▲

Price & Availability of SY8890505

	To Download SY8890505 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .